Ceramic Fibre Board
Ceramic Fibre Board
Description
Ceramic fiber board is made of ceramic fiber cotton as raw material, adding a small amount of organic and inorganic binders and other additives, using fully automatic control, continuous production, and a streamlined production line with advanced technology. Ceramic fiber board’s strength is higher than that of fiber blankets and vacuum forming felts, and is suitable for high-temperature fields that require rigidity and strength of products. The surface is flat, the size is accurate, the toughness is good, it can be cut at will, and the heat preservation effect is excellent. It is uniform inside and outside and has good heat insulation performance. Ceramic fiber board is an ideal heat preservation and heat insulation material for various industrial kilns.
Features
Excellent thermal stability and thermal shock resistance / Low heat capacity
Low thermal conductivity / High compressive strength / Good toughness
Easy to process and install
Application
Backing insulation of kilns in cement building materials industry
Backing insulation of various furnaces in the ceramic industry
Back lining, wall lining and lining insulation of kilns in petrochemical and metallurgical industries
Wall lining and backing insulation of glass furnace
Thermal insulation of the back lining of the heat treatment kiln
Refractory brick backing of electrolytic reduction tank in aluminum factory
High temperature reaction, wall lining and backing material of heating equipment
Physical And Chemical Indicators
|
Brand |
STBOD |
HABOD |
HZBOD |
|
|
Specification Temp. (℃) |
1260 |
1360 |
1430 |
|
|
Working Temp. (℃) |
1100 |
1200 |
1350 |
|
|
Bulk Density (g/cm3) |
280 |
280 |
280 |
|
|
Permanent linear change (%) |
-3 |
-3 |
-3 |
|
|
Thermal Conductivity(w/m.k) |
0.085(400℃) |
0.085(400℃) |
0.085(400℃) |
|
|
Cold Crushing Strength (MPa) |
0.2 |
0.2 |
0.2 |
|
|
Chemical Composition (%) |
Al2O3 |
43 |
51-53 |
39-40 |
|
Al2O3+SiO2 |
96 |
99 |
- |
|
|
Al2O3+SiO2+ZrO2 |
- |
- |
99 |
|
|
ZrO2 |
- |
- |
15-17 |
|
|
Fe2O3 |
1.0 |
0.5 |
0.2 |
|
|
Na2O+K2O |
0.5 |
0.2 |
0.2 |
|
1.Raw material quality control including physical and chemical testing.
Put the selected raw materials in the furnace for high temperature spinning.
2.Needle with the needling machine.
3.Cut the board into the size required by the customer.
Packaging according to safety sea-exporting packing Standard
Dispatch : loading the finished packing material at factory by container Door toDoor
By sea fumigated wooden pallet + plastic belt + plastic film wrap.
PRODUCT CATEGORIES
Focus on providing mong pu solutions for 5 years.
