The anchor brick is also known as hanging bricks. It uses high -quality raw materials. It is made of machine pressure or poured. It is made of high temperature sintering. The anchoring brick plays an important role when the masonry faces the wall, and it can improve the overallness of the straight wall.
The anchor brick is a new type involved in the type of industrial furnace, especially an anchoring brick for an industrial furnace, including the pillar composed of the hanging end and an anchoring body. The groove, at least one surface on the surface of the anchoring body is set up in the direction of the length direction. After the tendon strip is set, due to the reinforcement and pulling effect of the tendon strip, the strength of the anchor anti -tensile resistance is significantly improved. The barrier cannot be passed on the barrier, so the anchor brick of this structure is not easy to break.
The wall of the industrial furnace or flue is composed of the inner lining, thermal insulation layer, and the outer wall. The inner lining is refractory brick, the outer wall is ordinary sinter bricks, anchor bricks, bricks and holes bricks. The material is good, and it is used to connect to fixing these levels.
The anchor brick reduces the height of the brick body through the anchoring system, and it is not easy to make the brick body break in the construction. The network enhances the anchoring effect on pouring, increasing the binding area of anchor and refractory watering, and improves the overall refractory lining. When the nail nails are too softened or oxidized, the anchor tiles still have a strong anchoring effect, and the service life of the lining body is nearly doubled. The anchoring parts of the interior lining in some high -temperature zones use this structure configuration, so that the abrasion resistance of the lining body does not peel off, and the kiln operation rate is improved.
