In Apirl 260 pieces ceramic fiber modules are packed for delivering to customer in Iran. High quality and nice price thermal insulation materials in Topower Refractory.
The ceramic fiber modules is a new type of refractory lining product launched in order to simplify and speed up the construction of the kiln and improve the overallness of the furnace lining. It has a good fire resistance and heat insulation effect. How to make ceramic derivatives achieve the function of energy saving and consumption reduction:
1. In the kiln wall and the top of the kiln, there is a thermal insulation and heating refractory material silicate fiber module to make the thermal conductivity in the kiln smaller and the heat is not lost.
2. There is a residual heat utilization system on the tunnel kiln structure to use the extracted hot air for drying room to dry brick or as winter heating in the northern region.
3. There is a kiln door at the entrance and exit of the kiln to stable operations in the kiln and not affected by the outside world.
The color of the ceramic fiber modules is white and the size is regular, which can be directly fixed on the anchoring nails of the steel shell steel plate of the industrial kiln furnace. It has a good fire resistance and heat insulation effect, which improves the integrity of the fire resistance and heat insulation of the kiln.
At present, the overall module made by the use of aluminum ceramic fiber blankets is gradually becoming the first choice for modern industrial kiln lining thermal insulation with many advantages such as high temperature resistance and easy construction. The widespread application of ceramic fiber blankets in thermal treatment kiln is mainly due to its following advantages.
1. During the installation process, the folding blanket after lift is lift will produce huge stress, and it will be crowded and closed without leaving any gaps;
2. The high elasticity of the fiber blanket can make up for the deformation of the furnace shell and reduce the construction cost. At the same time, it can make up for the gaps caused by different components inside the furnace body due to different thermal changes;
3. Due to the light weight and low heat capacity (only 1/10 of light heat and heat -resistant lining and lightweight refractory brick), the energy consumption in the furnace temperature operation control can be significantly reduced;
4. Elastic fibrous blankets can resist mechanical external forces and resist any thermal impact;
5. Stable chemical performance. Except for phosphoric acid, hydrofluoric acid and strong alkali, other acids, alkali, and water, oil, and steam are not eroded.
With the development of refractory fiber production and application technology, refractory fiber products have achieved series and functionalization. From the temperature of the product, the product can meet the requirements of different temperature grades from 600 ° C to 1400 ° C. It can also meet the use of refractory fiber products in different industries in various industries. With the advancement of the national energy conservation and emission reduction plan, the transformation of the brick -brick tunnel kiln is imminent. It has excellent chemical stability; excellent thermal stability; excellent elasticity, ceramic fiber modules are in a pre -pressure state. After the furnace is mixed, the expansion of the aluminum silicate fiber module can seam the furnace lining and compensate for compensation. Fiber lining contraction to improve the insulation performance of fiber lining and good overall performance; excellent thermal stability and heat shock resistance; aluminum silicate fiber modules are installed quickly, and the anchor is set on the cold surface of the wall, which can reduce the material of the anchor components Requirements.
Therefore, in terms of form, it has gradually formed a secondary of the traditional ceramic fiber cotton, ceramic fiber blanket,, ceramic fiber board, cceramic fiber modules, ceramic fiber paper, fiber textiles and other forms. Processing or deep processing products.
