Rockwool Board
226
323

Rockwool Board

Rockwool board is a kind of quartz, basalt and other natural minerals as raw materials, after high temperature melting, fibrosis treatment made of semi-rigid board
MOQ: 100 pieces

Send Inquiry

Product Introduction

Description

Rockwool board is a kind of rock wool insulation material mainly used in slab tracks. It uses basalt as the main raw material. After high temperature melting, it is made into artificial inorganic fiber by high-speed centrifugal equipment. At the same time, binder and dustproof oil are added. After heating and curing, various specifications and different requirements of rock wool insulation boards are produced. At the same time, rockwool board can also be combined with glass wool and aluminum silicate wool to make a rock wool composite insulation board.

Features

Light in mass / Low thermal conductivity / Endothermic / Non-flammable / Sound absorbing

rock wool board

Application

Rockwool board can be used in the following industry：

Petrochemical industry: heat insulation, sound absorption and noise reduction for equipment in petroleum, electric power and chemical industries

Construction industry: heat insulation, sound absorption and noise reduction of building partitions, curtain walls, roofs and enclosures

Industrial and mining industry: heat preservation and fire protection of industrial kilns, ovens, large-caliber storage tanks and ships, etc.

Auxiliary products of rock wool: aluminum foil tape, fiberglass cloth tape, aluminum foil paper, fiberglass cloth, aluminum foil glass steel plate.

application

Physical And Chemical Indicators

Brand Properties		TP-Z450
Bulk Density (kg/m³)		80
(°C) Recommended temperature		450
(°C) Maximum use temperature		550
Volumetric hygroscopic rate		≤1%
Mass hygroscopic rate		≤1%
(w/m.k) Thermal Conductivity	70℃	0.040
	150℃	0.050
	200℃	0.064
	300℃	0.080
	400℃	-
Surface burning characteristics	Flue gas development index	≤25
	Flame spread index	0

Precaution

1. Pay attention to rain, and can not construct in rainy days.

2. For refrigeration, a moisture-proof layer must be added. At extremely low temperatures, resin-free rock wool is used as a thermal insulation material, and the moisture barrier must also be fireproof.

3. When the temperature exceeds a certain temperature (such as 200°C), appropriate external protection must be added to the insulating material to keep the thickness and bulk density of the rock wool board unchanged.

4. Regarding the insulation of large-caliber and flat-panel equipment with finished rock wool, when the temperature exceeds 200 ℃, please remember the instructions of the rock wool board manufacturer: add insulation nails (about 400mm apart), and the external protection should be tight.

5. Appropriate coating can be used for equipment that needs insulation to prevent corrosion, insulation nails and pipes. In addition, there should be no leakage. This way you can get better results.

6. If the finished rock wool board is easy to be mechanically worn under outdoor heat preservation conditions, it should be covered with metal or plastic, and then pay attention to the seams and the sealing of the seams. If necessary, add glue seal. The wrapping layer should not be less than 100mm.

7. When the thermal insulation object is placed at 90 degrees and has a certain height, the thermal insulation layer of the rock wool board must have positioning pins or support rings, and the spacing should not be greater than 3 meters to prevent the thermal insulation material from falling during sliding and vibration.

8. In order to minimize the heat loss, the joint of rock wool board and felt must be tightly connected. If there are multiple insulating layers, they need to be cross-connected to avoid thermal bridges. During cold insulation, the cold bridge must be completely insulated.